GOLDENISO/42 XTRAFLEX
COMPACTNESS AND FLEXIBILITY
| TECHNICAL DATA | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||
| PART REF. | HOSE SIZE | R.O.D | O.D | MAX. W.P | BURST | MIN. BEND | WEIGHT | FITTINGS | |||||||||
| DN | dash | inch | mm | inch | mm | inch | bar | psi | bar | psi | mm | inch | g/m | lb/ft | Std 1 | Std 2 | |
| H10097006* | 6 | -4 | 1/48" | 11.3 | 0.44 | 13.1 | 0.52 | 420 | 6,090 | 1,680 | 24,360 | 45 | 1.77 | 284 | 0.19 | MF+M00120-04 | – |
| H10097010* | 10 | -6 | 3/8" | 17.6 | 0.69 | 20.0 | 0.79 | 420 | 6,090 | 1,680 | 24,360 | 100 | 3.94 | 688 | 0.46 | MF+M00920-06 | – |
| H10097012* | 12 | -8 | 1/2" | 20.3 | 0.80 | 22.7 | 0.89 | 420 | 6,090 | 1,680 | 24,360 | 120 | 4.72 | 807 | 0.54 | MF+M00910-08 | – |
| H10097016* | 16 | -10 | 5/8" | 23.9 | 0.94 | 26.4 | 1.04 | 420 | 6,090 | 1,680 | 24,360 | 140 | 5.51 | 989 | 0.66 | IP+M01500-10 | SP+M05400-10 |
| H10097019* | 19 | -12 | 3/4" | 27.7 | 1.09 | 30.2 | 1.19 | 420 | 6,090 | 1,680 | 24,360 | 150 | 5.91 | 1,285 | 0.86 | IP+M01500-12 | SP+M05400-12 |
| H10097025* | 25 | -16 | 1" | 34.8 | 1.37 | 37.3 | 1.47 | 420 | 6,090 | 1,680 | 24,360 | 210 | 8.27 | 2,007 | 1.35 | IP+M01500-16 | SP+M05400-16 |
| H10097031* | 31 | -20 | 1.1/4" | 46.3 | 1.82 | 49.5 | 1.95 | 420 | 6,090 | 1,680 | 24,360 | 260 | 10.24 | 3,663 | 2.46 | IP+M01600-20 | SP+M05500-20 |
| H10097038* | 38 | -24 | 1.1/2" | 53.2 | 2.09 | 56.4 | 2.22 | 420 | 6,090 | 1,680 | 24,360 | 310 | 12.20 | 4,450 | 2.99 | IP+M01600-24 | SPGX+M05500-24GX |
| H10097051* | 51 | -32 | 2” | 68.9 | 2.71 | 72.4 | 2.85 | 420 | 6,090 | 1,680 | 24,360 | 500 | 19.69 | 7,310 | 4.91 | IS+M02700-32 | SPGX+M05500-32GX |
KEY FEATURES
• Bend radius which exceeds the standard requirements by – 30% to -50%
• Good flexibility in the whole temperature range
• Easy mounting in any installation
• High impulse resistance according to ISO 18752 requirements
• Weight saving of 20% vs traditional R15 hose construction
• No-skive fitting solution is available
• Isobaric pressure rating for easy selection and product management
APPLICATIONS & FLUIDS
• High pressure power lines for general hydraulics
• Heavy duty power lines
• Applications with installation constraints (short assemblies, compact spaces, low bend radii, etc.)
• Mineral oils, vegetable oils and synthetic ester based oils (up to 100°C/212°F), glycols and polyglycols, mineral oils in aqueous emulsion, water
CONTINUOUS SERVICE TEMPERATURE RANGE
-46 °C, -50 °F
121 °C, 250 °F
TUBE
Oil resistant synthetic rubber
REINFORCEMENT
Two high tensile steel wire braids (DN 6). Four high tensile steel spirals (DN 10-31). Six high tensile steel spirals (DN 38-51).
COVER
STRONG – TYPE “SC”
Synthetic rubber with high abrasion, ozone, weather and heat resistance and an extended operational temperature range
APPLICABLE SPECS
ISO 18752-C (Grade C “Plus” approved 1 Mil impulse cycles with Interlock Plus fittings), meets and exceed ISO 3862-R15 performance
TYPE APPROVALS
CU-TR; MSHA; FRAS; B; ABS; BV; LR; RINA; DNV-GL(MED); DNV-GL; MA