HYDROROPE
OUTSTANDING TENSILE STRENGTH
| TECHNICAL DATA | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||
| PART REF. | HOSE SIZE | R.O.D | O.D | MAX. W.P | BURST | MIN. BEND | WEIGHT | FITTINGS | |||||||||
| DN | dash | inch | mm | inch | mm | inch | bar | psi | bar | psi | mm | inch | g/m | lb/ft | Std 1 | Std 2 | |
| H10136025* | 25 | -16 | 1 | 38.2 | 1.50 | 41.4 | 1.63 | 420 | 6,090 | 1,680 | 24,360 | 400 | 15.51 | 2,910 | 1.95 | IP+M01850-16 | – |
| H10136031* | 31 | -20 | 1.1/4" | 46.9 | 1.85 | 50.1 | 1.97 | 420 | 6,090 | 1,680 | 24,360 | 450 | 17.72 | 3,749 | 2.52 | IP+M01600-20 | – |
| H10136A38*† | 38 | -24 | 1.1/2" | 53.2 | 2.09 | 56.5 | 2.22 | 350 | 5,076 | 1,400 | 20,305 | 500 | 19.65 | 4,256 | 2.86 | IP+M01600-24 | – |
| H10136038* | 38 | -24 | 1.1/2" | 54.7 | 2.15 | 57.3 | 2.26 | 420 | 6,090 | 1,680 | 24,360 | 600 | 23.62 | 4,650 | 3.12 | IS+M02700-24 | – |
| H10136051* | 51 | -32 | 2" | 69.2 | 2.72 | 72.4 | 2.85 | 420 | 6,090 | 1,680 | 24,360 | 800 | 31.50 | 6,590 | 4.42 | IS+M02700-32 | – |
| H10136063* | 63 | -40 | 2.1/2" | 84.1 | 3.31 | 87.3 | 3.44 | 380 | 5,511 | 1,520 | 22,045 | 900 | 35.43 | 9,405 | 6.31 | IP+M01900-40 | – |
| H10136076* | 76 | -48 | 3" | 97.1 | 3.82 | 100.2 | 3.94 | 350 | 5,076 | 1,400 | 20,305 | 1000 | 39.37 | 11,106 | 7.46 | IS+M02700-48 | – |
| † Compact hose | |||||||||||||||||
KEY FEATURES
• Designed to resist pulling force
• High pressure resistance
• Superior abrasion resistance
• High ozone and weather resistance
• Flame resistance to a wide range of specs
• Anti-static and anti-toxic cover
APPLICATIONS & FLUIDS
• Heavy duty power lines in severe environmental conditions
• Specific installations with tough abrasion conditions
• Off-shore applications, underground and open-pit mining, special machines where hose high pulling resistance is required (grabs, etc.)
• Mineral oils, vegetable oils and synthetic ester based oils (up to 100°C/212°F), glycols and polyglycols, mineral oils in aqueous emulsion, water
CONTINUOUS SERVICE TEMPERATURE RANGE
-46 °C, -50 °F
121 °C, 250 °F
TUBE
Oil resistant synthetic rubber
REINFORCEMENT
Four (DN 25, 31, DN 38 Compact) and six (DN 38, DN 76) high tensile steel spirals + One high tensile steel wire braid
COVER
STRONG – TYPE “SC”
Synthetic rubber with high abrasion, ozone, weather and heat resistance and an extended operational temperature range
APPLICABLE SPECS
Manuli® Design
TYPE APPROVALS
MSHA; CU-TR