PUSH-PULL FEMALE CONNECTABLE WITH MALE UNDER PRESSURE – MQS-AFM

 

TECHNICAL DATA

SIZE

WORKING
PRESSURE
Dynamic

RATED FLOW
at 0.2 MPa of
pressure drop

CONNECTION
EFFORT

OIL SPILLAGE
Connection /
Disconnection

MINIMUM BURST PRESSURE

CONNECTION /
DISCONNECTION
UNDER
PRESSURE

DN

inch

Dash

MPa

PSI

l/min

US
GPM

N

lb.

cc.

cubic
inch

Male

M & F

MPa

PSI

MPa

PSI
12 1/2 8 30 4,350 80 18.8 170 37.8 2 0.122 125 18,125 125 18,125 Connection only, with male under pressure
The rated flow represents the normal operating condition. The maximum recommended flow rate is equal to 1.5 times the rated flow

PRODUCT DESCRIPTION

• Connectable with male ISO A under pressure
• Working pressure 30MPa
• Connection/disconnection PUSH-PULL
• No shut-off, Manuli mechanical valve block system
• Installation on hoses with coupling blocked on panel by the sleeve
• Breakaway function according to ISO 5675
• Interchangeable according to ISO 7241 series A
• Wide range of termination end

MATERIAL

Couplings in steel with some stressed area hardened, carbonitrided valve, springs in C98 steel, seals in NBR, back-up ring PTFE. PU seal on ½” female available on request.

WORKING TEMPERATURE

-22ºF up to +230ºF (-30ºC up to +110ºC)
For other temperatures, the quick coupling is assembled with specific seals

SAFETY FACTOR

4:1 for dynamic pressures

IMPULSE PRESSURES

500,000 cycles (connected and disconnected conditions) at 120% of the rated one (freq. 1Hz)

TEST SPECIFICATIONS

ISO 18869

BSP
Q01611041A
Q01611041A
BSP TERMINATION ENDS TO DIN 3852 X TYPE
SIZE PART NUMBER THREAD DIMENSIONS mm
DN Inch Dash Female coupling A B D
12.5 1/2" -08 Q01611041A-08-08 1/2" 91.2 ⌀38 32

Back to top

SAE
Q01611250A
Q01611250A
SAE TERMINATION ENDS TO ISO 8434-2
SIZE PART NUMBER THREAD DIMENSIONS mm
DN Inch Dash Female coupling A B D
12.5 1/2" -08 Q01611250A-08-08 3/4"- 16 UNF 90.7 ⌀38 32

Back to top